Cement Solutions

Cement Solutions2019-02-08T00:49:53+00:00

CLINKER SAMPLERS

FCT ACTech offers end to end solution for its analyzers. Starting with samplers, crushers, sample delivery systems, splitters, etc.

Our Clinker Sampler SampCX1 offers a robust and dependable solution for cement plants that want to sample close to/after a roller crusher. Available only with the purchase of our FLX or OFX analyzers. Guaranteed to work in an online configuration with our machines.

  • Cylinder Stroke: 600-900mm/ 24-35 inch (depending on configuration)

  • Cylinder diameter: 90-125mm/ 3.5-5 inch (depending on configuration)

  • Control voltage: 24V DC

  • Clinker collected up to max. 50mm (2 inch)

  • Temperature of collected clinker: 400C

  • Weight: 250-300Kg/ 550-660Lbs (depending on configuration)

  • Capacity: 1.5m3/h

  • Operational voltage: 400V/50Hz or 480V/60Hz, 3-Phase

POWDER SAMPLERS

A. SamPX1 PISTON SAMPLER

The piston sampler SamPX1 remove a selective sample from a material flow. A sample collecting pipe is pneumatically introduced in the material flow at the desired frequency to collect material for the analyzer.

  • Diameter of the sample collecting pipe:    Ø 50-75 mm /2-3 inch (Depending on configuration)

  • Sample volume approx. 130-150 dm³/h or 4.6-5.3 ft³/h

  • Weight: 20-22kg /44-49lbs

B. SamSX1 SCREW SAMPLER

The screw sampler SamSX1 is provided with special-cut openings, allowing moving particles to drop in when inserted in the material flow. When sampling, the screw-conveyor is inserted in the direction of the material flow. At a predetermined frequency, the screw reverses and conveys the material sampled that in turn is then discharged into the sample collecting pipe.

  • Diameter of the sample collecting pipe:    Ø 50-75 mm /2-3 inch (Depending on configuration)

  • Sample volume approx. 130-150 dm³/h or 4.6-5.3 ft³/h

  • Weight: 20-22kg /44-49lbs

C. CUSTOM-DESIGNED SAMPLERS for clinker applications

FCT ACTech can provide custom-designed and engineered to last clinker samplers to address tight spaces and difficult problems. Available with the purchase of any of our analyzers as part of an end-to end solution.

Spoon, screw or piston samplers as well as other more complex designs. For clinker applications.

  • Capable of collecting 2-5kg/4.5-11Lbs “in one go”

  • Operating temperature: 100-400C

  • Motorized, pneumatically or hydraulically actuated

JAW CRUSHER

The jaw crusher JCX1 is designed to give long life and excellent performance. The combination of Flat Faced Pulleys as supplied with V-belts on the crusher was a specially engineered arrangement for this machine. This combination has proven to be the very best arrangement for machines such as these.

  • Capacity: 590 Kg/ 1300 lbs (per hour)

  • Jaw Capacity: 12.7cm x 17.8cm (5″ x 7″)

  • Reduction Size: 0.3cm/ 1/8″ (minimum) to 2cm/ 3/4″ (maximum)

  • RPM :400