CLINKER SAMPLERS

FCT ACTech offers end to end solution for its analyzers. Starting with samplers, crushers, sample delivery systems, splitters, etc.

Our Clinker Sampler SampCX1 offers a robust and dependable solution for cement plants that want to sample close to/after a roller crusher. Available only with the purchase of our FLX or OFX analyzers. Guaranteed to work in an online configuration with our machines.

  • Cylinder Stroke: 600-900mm/ 24-35 inch (depending on configuration)

  • Cylinder diameter: 90-125mm/ 3.5-5 inch (depending on configuration)

  • Control voltage: 24V DC

  • Clinker collected up to max. 50mm (2 inch)

  • Temperature of collected clinker: 400C

  • Weight: 250-300Kg/ 550-660Lbs (depending on configuration)

  • Capacity: 1.5m3/h

  • Operational voltage: 400V/50Hz or 480V/60Hz, 3-Phase

POWDER SAMPLERS

A. SamPX1 PISTON SAMPLER

The piston sampler SamPX1 is installed perpendicular to the direction of material flow. At a predetermined frequency, the sampler control system will, activate the pneumatic ram from its rest position inside the discharge body, clearing any old sample in the sample tube. Sample is then collected via the special cut openings and the pneumatic ram is retracted which then discharges the sample into the sample collecting pipe. One (1) adjustable timer is included in the control system to control the duration of the ram in the sampling position to manage the quantity of sample collected.

  • Diameter of the sample collecting pipe:    Ø 50-75 mm /2-3 inch (Depending on configuration)

  • Sample volume approx. 130-150 dm³/h. Maximum stroke frequency – once/minute (60 times per hour)

  • Weight: 20-22kg /44-49lbs

B. SamSX1 SCREW SAMPLER

The screw sampler SamSX1 is installed perpendicular to the direction of material flow. At a predetermined frequency, the sampler control system will start the screw in reverse to clear any old material, then will change the screw direction and collect sample, via the special cut openings, which is then discharged into the sample collecting pipe. Two (2) adjustable timers are included in the control system to control the cleaning time and sample time in order to ensure fresh sample is collected and to manage the quantity of sample collected.

  • Diameter of the sample collecting pipe:    Ø 50-75 mm /2-3 inch (Depending on configuration)

  • Sample volume configurable using the adjustable timers. When run continuously, sample volume approx. 130-150dm3/h

  • Weight: 20-22kg /44-49lbs

C. CUSTOM-DESIGNED SAMPLERS for clinker applications

FCT ACTech can provide custom-designed and engineered to last clinker samplers to address tight spaces and difficult problems. Available with the purchase of any of our analyzers as part of an end-to end solution.

Spoon, screw or piston samplers as well as other more complex designs. For clinker applications.

  • Capable of collecting 2-5kg/4.5-11Lbs “in one go”

  • Operating temperature: 100-400C

  • Motorized, pneumatically or hydraulically actuated

JAW CRUSHER

The jaw crusher JCX1 is designed to give long life and excellent performance. The combination of Flat Faced Pulleys as supplied with V-belts on the crusher was a specially engineered arrangement for this machine. This combination has proven to be the very best arrangement for machines such as these.

  • Capacity: 590 Kg/ 1300 lbs (per hour)

  • Jaw Capacity: 12.7cm x 17.8cm (5″ x 7″)

  • Reduction Size: 0.3cm/ 1/8″ (minimum) to 2cm/ 3/4″ (maximum)

  • RPM :400